GT Go-Karting
Login Or Register To GT Go-Karting!

go karts chassis

Go down

go karts chassis Empty go karts chassis

Post by Speed Infinite on Thu Mar 26, 2009 9:13 am

The chassis are made of steel tube.[6][7] There is no suspension therefore chassis have to be flexible enough to work as a suspension and stiff enough not to break or give way on a turn. Kart chassis are classified in the USA as 'Open', 'Caged', 'Straight' or 'Offset'. All CIK-FIA approved chassis are 'Straight' and 'Open'.

Open karts have no roll cage.
Caged karts have a roll cage surrounding the driver; they are mostly used on dirt tracks.
In Straight chassis the driver sits in the center. Straight chassis are used for sprint racing.
In Offset chassis the driver sits on the left side. Offset chassis are used for left-turn-only speedway racing.
The stiffness of the chassis enables different handling characteristics for different circumstances. Typically, for dry conditions a stiffer chassis is preferable, while in wet or other poor traction conditions, a more flexible chassis may work better. Best chassis allow for stiffening bars at the rear, front and side to be added or removed according to race conditions.

Braking is achieved by a disc brake mounted on the rear axle. Front disc brakes are increasingly popular; however, certain classes do not allow them.

Professionally raced karts typically weigh 165 to 175 lb (75 to 80 kg), complete without driver. Avanti, Tony Kart, Trulli, Birel, CRG, Gillard, Intrepid, Kosmic, Zanardi or FA Kart are a few well known examples of the many European manufacturers of race-quality chassis. Margay is an American company producing kart chassis.
Speed Infinite
Speed Infinite

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum